What power range does a 12V BLDC gear motor cover?

Shenghe 12V BLDC gear motors range from 10W to 200W rated power. With planetary gearboxes the output torque reaches 5–60 Nm depending on gear ratio, making them suitable for small robots, seat adjusters, window lifts and battery-powered tools.

Can a 12V BLDC gear motor run directly from a car battery?

Yes. The motor is designed for 10–14.4V input, matching standard lead-acid and lithium 12V battery packs. The built-in Hall sensors provide commutation feedback to the controller across the full voltage range.

What gearbox types are available for the 12V variant?

Planetary gearboxes (5:1 to 100:1) for compact high-torque needs, and worm gearboxes (10:1 to 60:1) where self-locking or right-angle output is required. Spur gear options are also available for cost-sensitive projects.

How long does a 12V BLDC gear motor last in continuous duty?

Brushless design eliminates brush wear, so the main life limiter is the bearing. With sealed bearings and proper loading, expect 10,000–20,000 hours in continuous duty. Intermittent automotive duty extends life well beyond that.

Specification — 12V BLDC Gear Motor

12V BLDC Gear Motor For Automotive And Small Robotics.

A 12-volt brushless DC gear motor fits wherever space and voltage are limited but reliable torque is not optional. Shenghe 12V BLDC gear motors pair a compact brushless rotor with planetary, worm or spur gearboxes to deliver 0.5–60 Nm output torque from a standard 12V battery. No brush replacement, no spark risk, and Hall sensor commutation across the full 10–14.4V range.

10W – 200W rated power at 12VDC
Planetary, worm and spur gearbox options
Hall sensor + optional encoder feedback
10,000+ hour bearing life, brushless longevity

Request Quote Get Catalog WhatsApp

Why 12V BLDC Gear Motors

Compact Brushless Torque From A Standard Battery

Direct compatibility with 12V lead-acid and lithium packs
No brush wear — critical in sealed, hard-to-service enclosures
85–90% motor efficiency reduces heat and battery drain
Gear ratios 5:1 to 100:1 multiply torque without adding voltage
Compact 42mm–80mm frame fits inside robot chassis and vehicle panels
Low EMI compared to brushed motors, cleaner for nearby electronics

12V BLDC Gear Motor Specifications

Parameter	Range
Nominal voltage	DC 12V (10–14.4V)
Rated power	10W – 200W
Motor speed (no-load)	2000 – 4000 RPM
Gearbox type	Planetary / Worm / Spur
Gear ratio	5:1 – 100:1
Output torque	0.5 – 60 Nm
Protection	IP54 standard, IP65 optional
Feedback	Hall sensor (3-phase), optional encoder
Frame size	42mm / 57mm / 80mm

Typical Applications For 12V BLDC Gear Motors

Automotive accessories: Power seat adjusters, window lifts, mirror actuators, trunk lid openers
Small mobile robots: Wheel drive, arm joints, gripper actuation on 12V battery platforms
Medical devices: Hospital bed height adjusters, wheelchair drive wheels, infusion pump drives
Vending machines: Product dispensers, spiral coil drivers, door locks
Solar trackers: Small single-axis panel tilt drives on 12V off-grid systems
Marine equipment: Bilge pump drives, anchor windlass, chart plotter mounts

Technical Details And Options

Winding customization: Kv and resistance tuned for 12V to maximize efficiency at target speed
Gearbox material: Steel gears standard; POM gears for low-noise indoor applications
Shaft output: D-cut, keyed, or splined — specify during quoting
Thermal protection: Built-in PTC thermistor or NTC sensor option
Connector: JST, Molex, bare leads, or custom harness
Mounting: Flange, bracket, or inline — compatible with NEMA 17/23 patterns

Need A 12V BLDC Gear Motor?

Send your voltage range, target torque, speed, gearbox preference and quantity. We will recommend the best motor-gearbox combination and quote within one working day.