Why choose a brushless motor for agricultural equipment?

Brushless motors have no brush wear, run much longer in dusty outdoor environments and accept 12V/24V/48V battery power directly. They also eliminate spark hazards, which matters around combustible dust and flammable fertilizers.

What IP rating do I need for outdoor farm use?

IP65 is the normal minimum for tractors, sprayers and open-field robots. IP66 or IP67 is recommended for washdown equipment and high-pressure cleaning environments. Shenghe offers both variants.

Can the motor run from a 12V tractor battery?

Yes. Shenghe 12V BLDC motors cover up to about 200W and are designed for 12V vehicle electrical systems. 24V and 48V variants are available for higher power agricultural robots and feeders.

What torque range is typical for farm applications?

Direct-drive motors provide 0.1-2 Nm. With planetary or worm gearboxes the output torque reaches 50-300 Nm, enough for seed feeders, valve actuators, harvest carts and small AGVs.

Application — Agriculture

Brushless Motor For Agriculture And Farm Robotics.

Agricultural equipment runs outdoors, on battery power and sometimes for 16 hours a day. A brushless DC motor outlasts a brushed drive in dusty farm duty, draws less battery energy per hour and integrates cleanly with 12V, 24V or 48V vehicle systems. Shenghe builds BLDC motors and gear motors tested for farm machinery and agrivoltaic use.

12V / 24V / 48V battery direct drive
IP65 standard, IP67 optional for washdown
Long life in dusty outdoor duty
Planetary and worm gearbox options

Request Quote Get Catalog WhatsApp

Why BLDC On The Farm

What Replaces Brushed DC Motors In Modern Ag Equipment

No brush wear in dusty, high-vibration environments
85-92% efficiency extends battery runtime per charge
IP65 / IP67 sealing handles rain, mud, pressure washing
Silent operation suits livestock and greenhouse environments
No spark risk near combustible dust or fertilizer
Compact size fits inside tractor implements and robot chassis

Typical Agriculture Motor Spec Range

Parameter	Range
Voltage	DC 12V / 24V / 48V
Rated power	30 W — 1500 W
Motor speed	1500 — 4000 RPM
Gear ratio	5:1 — 300:1 (planetary or worm)
Output torque	2 Nm — 300 Nm
Protection	IP65 / IP67
Shaft	Stainless steel option for corrosive duty
Feedback	Hall sensor + optional encoder

Typical Agricultural Use Cases

Smart sprayers: Pump drive, nozzle valve actuation, boom fold and spray angle control
Precision seeders: Seed metering wheel, section control, row clutch
Greenhouse robots: Wheel drive, lift arm, irrigation valve actuation
Livestock feed systems: Auger feeders, weighing gates, ration mixers
Orchard platforms: Lift actuators, platform drive wheels
Crop monitoring carts: Low-speed mobile platforms carrying sensors and cameras
Irrigation controllers: Motorized ball valves on drip lines and sprinkler manifolds

Durability Details That Matter Outdoors

Sealed bearings: Lifetime-lubricated, no service intervals
Stainless shaft option: Resists corrosion from fertilizer splash
Cable gland sealing: Fully potted entry, no water ingress
Vibration-rated magnets: Epoxy-bonded rotor for rough terrain transport
Operating range: -25 °C to +65 °C covers most outdoor seasons
Connector options: M12 automotive, Deutsch DT, Superseal

Motor For Your Ag Equipment?

Send voltage, load, speed, IP requirement and quantity. We recommend a field-tested motor and gear combination and quote within one working day. Or request the catalog to evaluate the full ag drive range.