What is the typical output torque of a 24V BLDC geared motor?

Output torque ranges from roughly 2 Nm on 100W units with a 5:1 ratio up to about 100 Nm on 400W units with a 100:1 planetary gearbox.

Planetary or worm gearbox for a 24V BLDC?

Planetary gives higher efficiency and inline output; worm gives right-angle output and self-locking load hold. Pick planetary for precision drives and worm for load-holding applications.

What power range is available at 24V?

24V BLDC geared motors are available from 30W to about 750W. Higher powers are typically built at 48V to keep current within reasonable cable sizing.

Is a matching controller available?

Yes. BLD22010 (18-60V, 10A) is the standard match for 24V BLDC geared motors up to 500W. Higher-power variants ship with BLDB6010 for FOC control.

24V BLDC Geared Motor

24V BLDC Geared Motor With Planetary Or Worm Gearbox.

A 24V BLDC geared motor gives you the long life and closed-loop control of brushless DC with the torque density of a planetary or worm gearbox — the most common drive for AGVs, conveyor feeders, medical equipment and light robotics. Shenghe builds the range from 30W to 750W with integrated gear heads and matched controllers.

30W — 750W at 24V DC
Planetary: 3:1 — 100:1, inline output
Worm: 30:1 — 100:1, right-angle, self-locking
Output torque up to 100 Nm

Request Quote Get Catalog WhatsApp

24V BLDC Geared Motor Range

Parameter	Range
Voltage	DC 24V
Power	30 W — 750 W
Motor speed	3000 RPM
Output speed	30 — 1000 RPM (after gearbox)
Output torque	2 — 100 Nm
Gear type	Planetary / worm / right-angle
Gear ratio	3:1 — 100:1
Efficiency	≥ 85 % (motor), 70-90% (with gearbox)
Protection	IP54 / IP65 optional
Feedback	Hall sensor standard, encoder optional

When To Choose 24V Over 48V

Battery architecture of the machine is already 24V (AGVs, carts, medical beds)
Power under 750W — above that the current becomes too high for 24V wiring
Low-voltage safety standard required (SELV-compliant design)
Simpler controller — BLD22010 handles the whole 24V range
Cable run is short enough that voltage drop is negligible

Gearbox Types

Planetary gearbox — high efficiency (~90%), low backlash, inline output, compact, best for precision positioning
Worm gearbox — right-angle output, self-locking (no reverse drive), compact high reduction, ideal for load-holding
Right-angle bevel — right-angle output without self-locking, higher efficiency than worm
Spur gearbox — low cost, moderate efficiency, typical for small feeders and pumps
Output shaft can be machined to custom length, key, flat or D-cut

Typical Applications

AGV drive wheels and steering mechanisms
Medical bed and hospital cart actuators
Conveyor feed rollers and indexing tables
Automated gate and barrier drives
Stage and studio camera dollies
Small cleaning robot wheels and brush drives
Food processing portion feeders

Need A 24V BLDC Geared Motor?

Tell us output torque, output speed, gearbox preference, shaft spec and quantity. We recommend the motor / gearbox / controller set and quote from factory within one working day.